Various types of fin tubes - suitable for temperature and material selection.
.jpg)
1.To fabricate Fin tube type Heat Exchanger as the descriptive table for temperature.
|
Fin bonding type |
Maximum design Process Temperature |
| I-Type (Cold work winding) | < 250℃ |
| L-Type (Cold work winding) | < 250℃ |
| LL-Type (Cold work winding) | < 250℃ |
| KL-Type (Cold work winding) | < 250℃ |
| Embedded (G-Type)(Cold work winding) | < 400℃ (CS、SS) |
| Oval Fin(Cold work winding) | < 250℃ |
| Rush Fin (Cold work winding) | < 250℃ |
| Extruded-Type (Squeeze) | < 250℃ |
| Low Fin (Squeeze) | < 250℃ |
| Longitudinal Fin (Welded) | < 400℃ |
| Serrated Welded (Welded) | < 800℃ |
| Solid Welded (Welded) | < 800℃ |
| Vaporizer (Welded) | < 800℃ |
|
NOTE：Expect where stated otherwise, the above limits are based on a carbon steel core tube and aluminium fins, different materials for the core tube and/or the fins may result in a different temperature limit. |
|
2.Material selection of Fin Tube
Depend on design fluid, normally as below:
2-1.Tube：
(a)Carbon steel：A179,A192,A210-A1,S-TEN1,S-TEN2, A334-1,A334-3,
A213-T11,A213-T12, A213-T22
(b)Stainless Steel：A213-TP304,A213-TP304L,A213-TP316,A213-TP316L,
A213-TP317,A2130-TP321,A213-TP310S
(c)Special Alloy：A789-S31803,S32205,SIC10, SIC11,SIC12,
INCONEL C-276,INCOLOY 800,INCOLOY 825,MONEL 400
(d)Copper Alloy：B111-C12200,B111-C68700,B111-C70600,B111-C71500,
B111-C44300
2-2.Fin：
(a)Carbon Steel：SPCC,SECC
(b)Stainless Steel：A240-304,A240-316,A240-316L,A240-309,A240-430
(c)Alum：B209-A1100,B209 -A1050,B209-A1060,B209-A6063
(d)Copper Alloy：B152-C10200,B152-C11000,B152-C12200,
B171-C70600,B171-C71500,B171-C44300